Basic hoods are ideal for rooms with ceilings below 2.4m (8') and for shallow countertops. The 1.2m (4') model works well as an individual workstation. The 1.8m (6') model is spacious enough to accommodate numerous samples or to share work space with another person.
Available with or without a blower. Blower may be mounted in or above the hood, or on the roof. A 1/3 hp motor is included with Basic 47 hoods that have a blower (except 30152-610 and -612, which have a 1/2 hp motor). Basic 70 hoods with blower have a 3/4 hp motor.
Hoods are furnished with a 0.5cm ( 3/16") thick tempered safety glass counterbalanced sash and a 25.4cm (10') diameter duct collar. Interior and exterior are constructed of glacier white, epoxy-coated, 16-gauge steel. Hood includes a removable front panel in glacier white, a removable air foil, two-piece adjustable baffle, and a vapor-proof incandescent light fixture. The right side fixture panel is factory-prepared to accept up to three service fixtures, one duplex electrical receptacle, and a Guardian air monitor. The right interior side wall is factory-prepared for one wall-mounted cupsink with turret. Hood liner top is factory-prepared for two customer-supplied apparatus rods.
The 115V models are ETL and ETL-C listed; 230V models are CE marked.
Ordering Information: Worksurface and base cabinet or stand are required for operation (all sold separately). Service fixture, receptacle, Guardian monitor, cupsink, and turret kits are also available. For unassembled Basic hoods, contact us. Switches, electrical wiring, and connections are not included with explosion-proof units. Wiring and switches must be added after installation. Field-installed electrical wiring of explosion-proof units is not provided.
This is only for Labconco, Model 2247500. It may differ from the image shown in color, features, may be an accessory, etc. Please refer to the model number or contact us if you have any questions.